Directions for use:
Step 1
The surface on which you will apply the mass should be matte. So if you are using a polystyrene base, a wooden stand, or a piece of plastic, sand the surface with a sponge or sandpaper. We recommend painting the surface with matte white acrylic paint, if possible. If you apply the paste to a pre-painted model or diorama, ensure all pigments and oil effects are sealed. For example, they are protected with clear varnish, so they do not let the color go into the paste.
Step 2
Mix the paste exactly.
Step 3
To apply the paste smoothly, preferably choose a metal spatula. You can also use a large paintbrush; the paste will level out but retain gentle undulations. If the surface has a lot of cracks, holes, and the like, fill them with the paste and then pour larger areas only later. Let it dry for about 24 hours. After a few tens of minutes after application, you can make footprints, wheels, etc. The paste on its own will replicate a condensed, untouched layer of snow.
Step 4
If you are interested in more fluffy, loose, dissolved snow on the freshly poured paste, pour the enclosed powder, for example, through a sieve. Do not press down; the powder will soak up from underneath. You can also pile up more enormous mounds and mix them with the paste, forming disintegrated snow lumps. Finally, you can simultaneously use steps 3 and 4 on one scene, forming smooth layers on the side of the road, for example, and lumps and ditched layers along the route.